Adhesives and Sealers »

Sure Seal - Stone Sealer 24/7 Stone Impregnator 20L

click to view WEBID:239 Non-flammable, environmentally friendly, water-based impregnator that is used as a superior impregnator/sealer on all types of stone (including sandstone, limestone, terra cotta, brick, concrete, etc) and to help prevent oil and water-based staining. Resists staining from gum. Will not whiten, puddle, flake, peel or discolour while allowing treated surface to breathe. UV light resistant. For both indoor and outdoor use.

$580.00 for 20L (inc. GST) FREE DELIVERY NSW ($29.00 per/L)( $30 surcharge other states) Quantity

Installation

Always ensure that the surface is clean and free from debris and previous sealants and waxes. Any existing stains must be removed prior to sealant application. Apply by brush, roller or garden-type sprayer. One good coat is normally sufficient. However, on very porous surfaces or heavy walkway areas, two coats are recommended. Allow five hours between application of each coat. Normal drying time on marble or granite is approximately 20 minutes. However, buff before completely dry.

Maintenance

On outdoor surfaces, use a garden hose with a pressure nozzle or pressure washer with a pressure of up to 1200 PSI (be careful not to etch surface). Do not use harsh cleaning agents such as abrasive powders, ammonia, acids, bleach, solvents or abrasive scrubbing pads.

Specifications

• Download Information PDF
• Get Adobe Reader