Adhesives and Sealers »

Pen E- Guard Sealer

click to view WEBID:268 PEN-E-GUARD PENETRATING SEALER & STAIN PROTECTOR FREE DELIVERY SYDNEY METRO ONLY 5 LITRE $245 ($49-00 per litre) 10 LITRE $390 (39-00 per litre) 20 LITRE $580 (29-00 per litre) Usage: INDOOR, OUTDOOR, WALL, FLOOR, SWIMMING POOL SURROUND

$580.00 for 20 L (inc. GST) Quantity

PEN-E-GUARD

PENETRATING SEALER & STAIN PROTECTOR

 Suitable for Concrete, bricks and natural stone products.

Designed to protect, beautify and enhance the surface.

Can be applied while stone is still wet after cleaning

.

Use on concrete, unglazed tiles, pavers, natural

stone, granite, brick, terracotta, marble and slate.

Pen –E-Gaurd Sealer will maintain the un-sealed look,

whilst protecting the surface from water and staining.

Pen_E Gaurd Sealer is a fast curing water based sealer

which  can be used indoors or outdoors, with no

unpleasant odours or flammability problems.

Available in  5Litre, 10Litre, 20Litre or 200Litre

AUSTRALIAN MADE

USED ON THE

M5 MOTORWAY

IN SYDNEY

Features of Pen-E Gaurd Sealer:

• Guards Concrete, Terracotta, Unglazed Tiles, Pavers, Sandstone, Limestone,

Bluestone, travertine and other natural rock against water damage and staining.

• Enables easier removal of dirt, grease, graffiti and posters from walls.

• Eliminates the occurrence of Efflorescence.

• Reduces Moss, mould and algae growth.

• Reduces corrosion attack on steel reinforcing.

• Retains a natural look.

• Breathable, allows water vapour to escape.

• Deep penetrating.

• Food Safe

• Alkali resistant

• Salt barrier, ideal around saltwater pools or marinas.

• Pen-_E  Gaurd  Sealer will last up to 10 years or longer dependant on application

and weather conditions.

• Water based non flammable.

• No odour.

• Non film forming will not flake or peel.

Coverage = 7sq.m per Litre Approx

Application:

• Surface to be treated can be dry or damp but must be cleaned.

• Apply Penetrating Sealer liberally, by spray, flood coat spreading with bristle

broom, sponge or roller.

• Give whole surface a “wet” look.

• Leave for 5-20 minutes then reapply a second coat whilst still wet.

• Allow to dry, water repellence will be evident immediately the surface appears